Does City of Westminster Cross-Connection Control and Backflow Program require annual backflow testing?

Upon installation and annually thereafter. Westminster says all commercial, industrial, domestic, irrigation, and fire line services must have an approved backflow assembly installed when the city determines one is required, and each assembly must be tested at installation and annually thereafter.

Where should I look for testers for City of Westminster Cross-Connection Control and Backflow Program?

No public tester directory is live for this utility yet. Use the official utility page first and do not infer approval from a generic directory.

What should I check before scheduling a tester for City of Westminster Cross-Connection Control and Backflow Program?

Confirm the due basis, property type, device type, and submission method before booking. Then confirm tester eligibility directly with the utility or portal, and make sure the report can be filed through the required utility or portal path.

What costs or portal fees should I expect for City of Westminster Cross-Connection Control and Backflow Program?

Testing is market-priced, but Westminster's broad service scope makes the real cost question whether the city has required protection on the line. Repair and retest costs rise with larger irrigation or fire line assemblies. The page is valuable because it answers whether Westminster's city program applies, not because the city posts retail rates.

Irrigation city route

Westminster irrigation backflow testing

Q: How do I submit or confirm a backflow test for City of Westminster Cross-Connection Control and Backflow Program?

Use the official utility workflow and submission methods listed on this page: Westminster cross-connection control and backflow program, Westminster cross-connection manual. Program phone: 303-658-2500.

Westminster explicitly names irrigation service in the public cross-connection scope, which makes irrigation a real page rather than a thin keyword variation.

Open irrigation workflow Utility requirements Request local help

City: Westminster Utility: City of Westminster Cross-Connection Control and Backflow Program Cadence: Upon installation and annually thereafter Last verified: 2026-06-29

Local answer

What to check for Westminster

Westminster explicitly names irrigation service in the public cross-connection scope, which makes irrigation a real page rather than a thin keyword variation.

Due basis: Westminster says all commercial, industrial, domestic, irrigation, and fire line services must have an approved backflow assembly installed when the city determines one is required, and each assembly must be tested at installation and annually thereafter.
Who is affected: Commercial, industrial, domestic, irrigation, and fire line services in Westminster where the city determines an approved backflow assembly is required.
Program phone: 303-658-2500

Evidence-backed next step

Use the governing utility workflow

City search demand maps directly to Westminster's governing cross-connection program.

Open irrigation workflow

Local signals

Signals that matter before you act

Irrigation services are directly named in the city program.
Installation testing and annual retesting both apply.
The manual gives more detail once the city has required protection.

Workflow

Westminster workflow order

Confirm the irrigation service needs a city-approved assembly.
Complete installation testing or annual retesting.
Follow the city manual if the irrigation setup or hazard class needs more detail.

Official source trail

Source-backed utility record

Westminster is a useful Colorado utility because the city makes the scope broad and explicit: commercial, industrial, domestic, irrigation, and fire line services all fall into the same city-enforced cross-connection control framework.

Westminster cross-connection control and backflow program official program page

arrow_forward

Westminster cross-connection manual official manual

arrow_forward