BackflowVerdict Local backflow requirements
Request help
Menu
Request help
Portal city route

Fort Worth VEPO/Envirotrax backflow reporting portal

Use this page when a notice for Fort Worth mentions BSI, SwiftComply, WEIRS, VEPO, Aqua/TrackMyBackflow, Tokay WebTest, a customer portal, or online backflow test report submission.

Compare VEPO/Envirotrax portal utilities Utility requirements Find from notice Request local help
City: Fort Worth Utility: City of Fort Worth Water Backflow Program Cadence: Upon installation, repair, or relocation; and annually thereafter Last verified: 2026-06-29
Local answer

What to check for Fort Worth

Use this page when a notice for Fort Worth mentions BSI, SwiftComply, WEIRS, VEPO, Aqua/TrackMyBackflow, Tokay WebTest, a customer portal, or online backflow test report submission.

  • Due basis: All backflow protection assemblies must be tested on installation, repair, or relocation and annually after that. Fort Worth also calls out annual testing for all commercial-property assemblies and any health-hazard assemblies.
  • Notice or device clue: Look for the BPAT/tester registration context, Envirotrax record, service address, or assembly identifier.
  • Who is affected: Commercial properties, irrigation systems, firelines, and any site with a backflow assembly under Fort Worth water utility oversight.
  • Acceptance rule: Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.
  • Report workflow: VEPO Envirotrax
  • Credential gate: BPAT license, City of Fort Worth tester registration, License, insurance, and test-for-accuracy reports, State Fire Marshal employment requirement for fire protection sprinkler assemblies
  • Program phone: 817-392-8007
Notice-to-closeout map

Source-backed procedure before the record is treated as closed

This is the working path for Fort Worth notices: match the authority, confirm the tester gate, use the accepted submission route, and keep proof that the report was accepted.

Authority City of Fort Worth Water Backflow Program
Notice trigger Look for the BPAT/tester registration context, Envirotrax record, service address, or assembly identifier.
Tester gate View the official tester list
Submission route VEPO Envirotrax
Proof to keep Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.
Failure branch Open failed-test workflow before treating repair, retest, or resubmission as complete.
Local signals

Signals that matter before you act

  • Fort Worth backflow program page - program page
  • VEPO online system - submission portal
  • Due basis: All backflow protection assemblies must be tested on installation, repair, or relocation and annually after that. Fort Worth also calls out annual testing for all commercial-property assemblies and any health-hazard assemblies.
  • Program phone: 817-392-8007
Other Fort Worth routes

Stay inside the city intent cluster

Fort Worth annual backflow testing Fort Worth annual backflow testing: verify who must test, the due-date rule, tester requirements, and the official submission workflow.
arrow_forward
Submit Fort Worth VEPO/Envirotrax backflow test reports How to submit a backflow test report in Fort Worth through VEPO/Envirotrax, including notice clues, tester requirements, and accepted filing proof.
arrow_forward
Fort Worth approved backflow testers Find the official Fort Worth approved backflow tester route and confirm utility registration, credentials, and report submission requirements.
arrow_forward
Fort Worth failed backflow test What to do after a failed backflow test in Fort Worth: repair, retest, and confirm accepted report submission with the utility.
arrow_forward
Fort Worth irrigation backflow testing Check Fort Worth irrigation backflow testing triggers, device rules, tester requirements, and the official utility workflow.
arrow_forward
Fort Worth fire-line backflow testing Check Fort Worth fire-line backflow testing triggers, assembly rules, tester requirements, and the official utility workflow.
arrow_forward
Workflow

Fort Worth workflow order

  1. Use the Fort Worth backflow page to confirm the permit, inspection, and annual testing path for the assembly.
  2. Hire a licensed BPAT registered with the City of Fort Worth.
  3. Have the tester submit the report directly into the VEPO Envirotrax system and keep it available onsite for inspection when permits are involved.
  4. For installation, replacement, relocation, or removal questions, use the City's installation and permitting contact line before inspection.
  5. If the device fails, correct the issue and make sure the follow-up report is complete, accurate, and accepted before assuming the inspection or annual record is closed.
City FAQ

Fort Worth questions before you act

Which backflow reporting portal should Fort Worth use?

Fort Worth maps to City of Fort Worth Water Backflow Program. The stored portal context is VEPO/Envirotrax. Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.

What notice or device ID should I keep for Fort Worth?

Look for the BPAT/tester registration context, Envirotrax record, service address, or assembly identifier.

Who controls the rule for Fort Worth?

Fort Worth search demand is routed to City of Fort Worth Water Backflow Program. Commercial properties, irrigation systems, firelines, and any site with a backflow assembly under Fort Worth water utility oversight.

What costs or fees should I expect for Fort Worth?

Private Fort Worth quotes vary by assembly type, access, and whether inspection timing is involved. Repair and retest costs widen materially for fireline and larger commercial assemblies. Fort Worth's public materials are clearer on tester registration, permit sequencing, Development Services permit-cost routing, and inspection failure causes than public retail test pricing.