Tester city route

Garland approved backflow testers

Use this page when the search or notice says approved, certified, registered, or authorized backflow tester for Garland.

City: Garland Utility: City of Garland Water Supply Protection Cadence: Prior to permanent activation and annually thereafter Last verified: 2026-06-29
Local answer

What to check for Garland

Use this page when the search or notice says approved, certified, registered, or authorized backflow tester for Garland.

  • Due basis: Garland says all backflow prevention assemblies shall be tested according to TCEQ regulations prior to permanent activation of the plumbing system and annually thereafter. Test reports must be submitted to Garland Water Utilities within 10 days of the test.
  • Who is affected: Non-residential customers, irrigation systems, fire sprinkler systems, and any property where Garland Water Utilities requires a registered backflow assembly.
  • Program phone: 972-205-3244
Local signals

Signals that matter before you act

  • Open the Garland backflow tester list
  • Confirm tester status on the governing list before treating a provider as approved.
  • Use the utility workflow for deadlines, report acceptance, and submission requirements.
Workflow

Garland workflow order

  1. Check whether the property is in Garland's water supply protection program or irrigation permit path.
  2. Make sure the assembly and the tester are both registered with Garland Water Utilities.
  3. Complete the test before permanent activation or by the annual due cycle.
  4. Submit the report to Garland Water Utilities within 10 days and keep the permit side in sync if irrigation work is involved.
Official source trail

Source-backed utility record

Garland publishes a strong municipal workflow: register assemblies and testers, test prior to permanent activation and annually thereafter, submit reports within 10 days, and bring extra documents for fire line tester registration.