BackflowVerdict Local backflow requirements
Request help
Menu
Request help
Annual testing

City of Fort Worth Water Backflow Program annual backflow testing

Fort Worth's public guidance is unusually direct: all backflow protection assemblies are tested upon installation, repair or relocation and annually thereafter.

Back to utility requirements Open the official program page Local follow-up options
Utility: City of Fort Worth Water Backflow Program Last verified: 2026-06-29 Due basis: All backflow protection assemblies must be tested on installation, repair, or relocation and annually after that. Fort Worth also calls out annual testing for all commercial-property assemblies and any health-hazard assemblies.
Direct answer

What matters here

Fort Worth's public guidance is unusually direct: all backflow protection assemblies are tested upon installation, repair or relocation and annually thereafter.

Due basis: All backflow protection assemblies must be tested on installation, repair, or relocation and annually after that. Fort Worth also calls out annual testing for all commercial-property assemblies and any health-hazard assemblies.

Highlights

Highlights

  • Annual testing is not limited to one narrow property class.
  • Testers must be registered with the City through VEPO.
  • Annual notices and online report submission both run through Envirotrax by VEPO.
  • The annual testing and enforcement program publishes a direct contact line at 817-392-8007.
Procedure facts

What has to line up before this item is closed

Use this as the source-backed check before treating the annual testing route as a completed compliance item.

Notice trigger Look for the BPAT/tester registration context, Envirotrax record, service address, or assembly identifier.
Tester gate View the official tester list
Submission route Fort Worth backflow program page (program page)
Proof to keep Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.
Failed-test branch Open failed-test steps if the assembly does not pass.
Official source trail 1 stored source links, last verified 2026-06-29.
Workflow

Workflow

  1. Confirm the assembly and permit status with Fort Worth Water.
  2. Use a BPAT registered with the City of Fort Worth.
  3. Make sure the tester submits the report directly into Envirotrax through VEPO and keep confirmation for the annual enforcement record.
Residential

Residential

  • Homeowners can install an irrigation system at their own residence, but testing and inspection still route through Fort Worth's registered-BPAT and permit workflow.
  • Residential users usually hit the City process when an irrigation assembly is installed, altered, repaired, or needs inspection closeout.
Commercial focus

Commercial and managed properties

  • Commercial properties carry the heaviest procedural load because annual testing, VEPO submission, and onsite inspection records all matter together.
  • Incomplete paperwork can fail inspection even when the field work was already performed.
After the official step

Need local follow-up?

Use the governing authority's official tester list after you confirm the rule, due basis, and submission method for this exact topic.

View the official tester list Request local help

If you still need help after checking the official workflow, you can submit a request for local follow-up.

FAQ

Local questions people actually ask

Does City of Fort Worth Water Backflow Program require annual backflow testing?

Upon installation, repair, or relocation; and annually thereafter. All backflow protection assemblies must be tested on installation, repair, or relocation and annually after that. Fort Worth also calls out annual testing for all commercial-property assemblies and any health-hazard assemblies.

Who is affected by City of Fort Worth Water Backflow Program backflow rules?

Commercial properties, irrigation systems, firelines, and any site with a backflow assembly under Fort Worth water utility oversight.

How do I submit or confirm a backflow test for City of Fort Worth Water Backflow Program?

Use the official utility workflow and submission methods listed on this page: Fort Worth backflow program page, VEPO online system. Program phone: 817-392-8007.

Which backflow reporting portal does City of Fort Worth Water Backflow Program use?

The stored submission route is: Fort Worth backflow program page (program page), VEPO online system (submission portal). Follow the utility workflow first because tester enrollment, filing fees, and pass/fail handling can differ by jurisdiction. The matching portal hub on BackflowVerdict is Compare VEPO/Envirotrax portal utilities.

Where should I look for testers for City of Fort Worth Water Backflow Program?

Start with the governing authority's published tester list. This utility has an official approved-tester route and it should be treated as the primary source.

What should I check before scheduling a tester for City of Fort Worth Water Backflow Program?

Confirm the due basis, property type, device type, and submission method before booking. Then open the official tester-list route, and make sure the report can be filed through the required utility or portal path.

What costs or portal fees should I expect for City of Fort Worth Water Backflow Program?

Private Fort Worth quotes vary by assembly type, access, and whether inspection timing is involved. Repair and retest costs widen materially for fireline and larger commercial assemblies. Fort Worth's public materials are clearer on tester registration, permit sequencing, Development Services permit-cost routing, and inspection failure causes than public retail test pricing.