BackflowVerdict Local backflow requirements
Request help
Menu
Request help
Failed-test city route

Irving failed backflow test

Use this page when the assembly already failed and the next step is repair, retest, and accepted report submission.

Open failed-test workflow Utility requirements Find from notice Request local help
City: Irving Utility: City of Irving Cross Connections and Backflow Cadence: Periodic and event-driven testing with online report submission Last verified: 2026-07-06
Local answer

What to check for Irving

Use this page when the assembly already failed and the next step is repair, retest, and accepted report submission.

  • Due basis: Irving requires backflow test reports to be submitted online through Envirotrax within 10 days of the test date, with permit verification needed for newly replaced or installed assemblies before testing.
  • Notice or device clue: Look for the BPAT/tester registration context, Envirotrax record, service address, or assembly identifier.
  • Who is affected: Irving customers with reportable backflow assemblies, newly installed or replaced assemblies, failed tests, and testers submitting through Envirotrax.
  • Acceptance rule: Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.
  • Report workflow: Envirotrax online backflow report submission
  • Report timing: Report due within 10 days after testing.
  • Credential gate: Tester credentials, Test kit calibration forms, Envirotrax registration
  • Program phone: 972-721-2104
Notice-to-closeout map

Source-backed procedure before the record is treated as closed

This is the working path for Irving notices: match the authority, confirm the tester gate, use the accepted submission route, and keep proof that the report was accepted.

Authority City of Irving Cross Connections and Backflow
Notice trigger Look for the BPAT/tester registration context, Envirotrax record, service address, or assembly identifier.
Tester gate View the official tester list
Submission route Envirotrax online backflow report submission
Proof to keep Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.
Failure branch Open failed-test workflow before treating repair, retest, or resubmission as complete.
Local signals

Signals that matter before you act

  • In the event of a failed test, Irving says the customer must be notified that repair or replacement and retesting are required.
  • Reports must be submitted online through Envirotrax within 10 days of the test date.
  • Replacement assemblies should include the old serial number on the test report.
Other Irving routes

Stay inside the city intent cluster

Irving annual backflow testing Irving annual backflow testing: verify who must test, the due-date rule, tester requirements, and the official submission workflow.
arrow_forward
Irving VEPO/Envirotrax backflow reporting portal Find the Irving VEPO/Envirotrax backflow report route, notice or device identifiers, tester gate, and proof of accepted submission.
arrow_forward
Submit Irving VEPO/Envirotrax backflow test reports How to submit a backflow test report in Irving through VEPO/Envirotrax, including notice clues, tester requirements, and accepted filing proof.
arrow_forward
Irving approved backflow testers Find the official Irving approved backflow tester route and confirm utility registration, credentials, and report submission requirements.
arrow_forward
Irving irrigation backflow testing Check Irving irrigation backflow testing triggers, device rules, tester requirements, and the official utility workflow.
arrow_forward
Irving fire-line backflow testing Check Irving fire-line backflow testing triggers, assembly rules, tester requirements, and the official utility workflow.
arrow_forward
Workflow

Irving workflow order

  1. Confirm whether the assembly is new, replaced, failed, or otherwise due for reporting.
  2. Use a tester with current license, test kit calibration, and Envirotrax registration.
  3. Have the tester submit online through Envirotrax within 10 days.
  4. If the test failed, make sure the customer is notified that repair or replacement and retesting are required.
City FAQ

Irving questions before you act

What should I do after a failed backflow test in Irving?

In the event of a failed test, Irving says the customer must be notified that repair or replacement and retesting are required.

Does a failed test still need report submission in Irving?

Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.

Who controls the rule for Irving?

Irving search demand is routed to City of Irving Cross Connections and Backflow. Irving customers with reportable backflow assemblies, newly installed or replaced assemblies, failed tests, and testers submitting through Envirotrax.

What costs or fees should I expect for Irving?

Private Irving prices vary by assembly and permit context. Repair and retest pricing depends on the failed assembly and whether replacement permitting is involved. Irving's public cost signal is more about avoiding late or incomplete Envirotrax reporting than retail test price.