BackflowVerdict Local backflow requirements
Request help
Menu
Request help
Tester city route

Austin approved backflow testers

Use this page when the search or notice says approved, certified, registered, or authorized backflow tester for Austin.

View the official tester list Utility requirements Find from notice Request local help
City: Austin Utility: Austin Water Cross-Connection Control Cadence: At least once a year for many listed assemblies, plus initial testing on installation Last verified: 2026-06-29
Local answer

What to check for Austin

Use this page when the search or notice says approved, certified, registered, or authorized backflow tester for Austin.

  • Due basis: Austin Water's 2025 ordinance requires annual testing for assemblies protecting health hazards and specified non-health hazards, with all test and maintenance reports submitted online through WEIRS.
  • Notice or device clue: Look for the WEIRS route, service address, tester record, or assembly identifier.
  • Who is affected: Sites with health-hazard assemblies, building or suite isolation, private fire hydrants, fire sprinklers, irrigation, auxiliary water, or other listed backflow risks.
  • Acceptance rule: Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.
  • Report workflow: WEIRS database
  • Report timing: Report due within 5 days after testing.
  • Credential gate: TCEQ BPAT license, Austin Water BPAT registration, Gauge calibration certificate
  • Program phone: 512-972-1060
Notice-to-closeout map

Source-backed procedure before the record is treated as closed

This is the working path for Austin notices: match the authority, confirm the tester gate, use the accepted submission route, and keep proof that the report was accepted.

Authority Austin Water Cross-Connection Control
Notice trigger Look for the WEIRS route, service address, tester record, or assembly identifier.
Tester gate View the official tester list
Submission route WEIRS database
Proof to keep Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.
Failure branch Open failed-test workflow before treating repair, retest, or resubmission as complete.
Local signals

Signals that matter before you act

  • Use Austin Water resources and WEIRS-linked tester information
  • Confirm tester status on the governing list before treating a provider as approved.
  • Use the utility workflow for deadlines, report acceptance, and submission requirements.
Other Austin routes

Stay inside the city intent cluster

Austin annual backflow testing Austin annual backflow testing: verify who must test, the due-date rule, tester requirements, and the official submission workflow.
arrow_forward
Austin WEIRS backflow reporting portal Find the Austin WEIRS backflow report route, notice or device identifiers, tester gate, and proof of accepted submission.
arrow_forward
Submit Austin WEIRS backflow test reports How to submit a backflow test report in Austin through WEIRS, including notice clues, tester requirements, and accepted filing proof.
arrow_forward
Austin failed backflow test What to do after a failed backflow test in Austin: repair, retest, and confirm accepted report submission with the utility.
arrow_forward
Austin irrigation backflow testing Check Austin irrigation backflow testing triggers, device rules, tester requirements, and the official utility workflow.
arrow_forward
Austin fire-line backflow testing Check Austin fire-line backflow testing triggers, assembly rules, tester requirements, and the official utility workflow.
arrow_forward
Workflow

Austin workflow order

  1. Confirm whether the site falls under Austin Water's annual testing categories in the current ordinance.
  2. Use a TCEQ-licensed BPAT registered with Austin Water.
  3. Submit each complete Test and Maintenance Report online through WEIRS within five calendar days, including assembly address, cause, manufacturer, size, model, serial number, test results, repair and retest results when applicable, owner details, BPAT license, gauge serial, and test date.
  4. If the assembly is removed, replaced, or tied to a removed hazard, report that status to Austin Water so the record is updated.
Official source trail

Source-backed utility record

Austin requires annual testing for many backflow assemblies, online TMR submission through WEIRS, City registration for BPATs in addition to TCEQ licensing, current gauge calibration, and complete TMR packet details.

Austin Water cross-connection control program official program page
arrow_forward
Austin backflow prevention overview official overview
arrow_forward
Austin BPAT registration and WEIRS instructions official tester page
arrow_forward
Austin ordinance 20250410-002 official ordinance
arrow_forward
City FAQ

Austin questions before you act

Where should I find approved backflow testers for Austin?

Start with the governing authority's published tester list. This utility has an official approved-tester route and it should be treated as the primary source.

Can I use a generic backflow tester search for Austin?

Use generic provider discovery only after the governing utility workflow is clear. Approval, reporting, and credential rules can be utility-specific.

Who controls the rule for Austin?

Austin search demand is routed to Austin Water Cross-Connection Control. Sites with health-hazard assemblies, building or suite isolation, private fire hydrants, fire sprinklers, irrigation, auxiliary water, or other listed backflow risks.

What costs or fees should I expect for Austin?

Private Austin quotes vary by assembly, hazard class, and whether the tester is already registered with Austin Water. Repair and retest cost widens for fire hydrant, fire sprinkler, and larger commercial hazard cases. Austin is strong on compliance detail and less public on retail pricing, so use the ordinance and WEIRS workflow as the anchor before comparing quotes.