BackflowVerdict Local backflow requirements
Request help
Menu
Request help
Failed-test city route

Austin failed backflow test

Use this page when the assembly already failed and the next step is repair, retest, and accepted report submission.

Open failed-test workflow Utility requirements Find from notice Request local help
City: Austin Utility: Austin Water Cross-Connection Control Cadence: At least once a year for many listed assemblies, plus initial testing on installation Last verified: 2026-06-29
Local answer

What to check for Austin

Use this page when the assembly already failed and the next step is repair, retest, and accepted report submission.

  • Due basis: Austin Water's 2025 ordinance requires annual testing for assemblies protecting health hazards and specified non-health hazards, with all test and maintenance reports submitted online through WEIRS.
  • Notice or device clue: Look for the WEIRS route, service address, tester record, or assembly identifier.
  • Who is affected: Sites with health-hazard assemblies, building or suite isolation, private fire hydrants, fire sprinklers, irrigation, auxiliary water, or other listed backflow risks.
  • Acceptance rule: Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.
  • Report workflow: WEIRS database
  • Report timing: Report due within 5 days after testing.
  • Credential gate: TCEQ BPAT license, Austin Water BPAT registration, Gauge calibration certificate
  • Program phone: 512-972-1060
Notice-to-closeout map

Source-backed procedure before the record is treated as closed

This is the working path for Austin notices: match the authority, confirm the tester gate, use the accepted submission route, and keep proof that the report was accepted.

Authority Austin Water Cross-Connection Control
Notice trigger Look for the WEIRS route, service address, tester record, or assembly identifier.
Tester gate View the official tester list
Submission route WEIRS database
Proof to keep Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.
Failure branch Open failed-test workflow before treating repair, retest, or resubmission as complete.
Local signals

Signals that matter before you act

  • Paper TMRs are no longer accepted.
  • Austin requires more than state licensing alone; tester registration with the utility matters too.
  • Each tester gauge must have a calibration certificate showing it passed within the last 12 months.
  • Incomplete or unsigned registration forms will not be processed.
  • False or incomplete records can trigger City enforcement, criminal exposure, and a one-year City registration suspension after repeated notices.
Other Austin routes

Stay inside the city intent cluster

Austin annual backflow testing Austin annual backflow testing: verify who must test, the due-date rule, tester requirements, and the official submission workflow.
arrow_forward
Austin WEIRS backflow reporting portal Find the Austin WEIRS backflow report route, notice or device identifiers, tester gate, and proof of accepted submission.
arrow_forward
Submit Austin WEIRS backflow test reports How to submit a backflow test report in Austin through WEIRS, including notice clues, tester requirements, and accepted filing proof.
arrow_forward
Austin approved backflow testers Find the official Austin approved backflow tester route and confirm utility registration, credentials, and report submission requirements.
arrow_forward
Austin irrigation backflow testing Check Austin irrigation backflow testing triggers, device rules, tester requirements, and the official utility workflow.
arrow_forward
Austin fire-line backflow testing Check Austin fire-line backflow testing triggers, assembly rules, tester requirements, and the official utility workflow.
arrow_forward
Workflow

Austin workflow order

  1. Confirm whether the site falls under Austin Water's annual testing categories in the current ordinance.
  2. Use a TCEQ-licensed BPAT registered with Austin Water.
  3. Submit each complete Test and Maintenance Report online through WEIRS within five calendar days, including assembly address, cause, manufacturer, size, model, serial number, test results, repair and retest results when applicable, owner details, BPAT license, gauge serial, and test date.
  4. If the assembly is removed, replaced, or tied to a removed hazard, report that status to Austin Water so the record is updated.
Official source trail

Source-backed utility record

Austin requires annual testing for many backflow assemblies, online TMR submission through WEIRS, City registration for BPATs in addition to TCEQ licensing, current gauge calibration, and complete TMR packet details.

Austin Water cross-connection control program official program page
arrow_forward
Austin backflow prevention overview official overview
arrow_forward
Austin BPAT registration and WEIRS instructions official tester page
arrow_forward
Austin ordinance 20250410-002 official ordinance
arrow_forward
City FAQ

Austin questions before you act

What should I do after a failed backflow test in Austin?

Paper TMRs are no longer accepted.

Does a failed test still need report submission in Austin?

Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.

Who controls the rule for Austin?

Austin search demand is routed to Austin Water Cross-Connection Control. Sites with health-hazard assemblies, building or suite isolation, private fire hydrants, fire sprinklers, irrigation, auxiliary water, or other listed backflow risks.

What costs or fees should I expect for Austin?

Private Austin quotes vary by assembly, hazard class, and whether the tester is already registered with Austin Water. Repair and retest cost widens for fire hydrant, fire sprinkler, and larger commercial hazard cases. Austin is strong on compliance detail and less public on retail pricing, so use the ordinance and WEIRS workflow as the anchor before comparing quotes.