Notice finder

Turn a backflow notice into the right next page.

Search the city, utility, portal name, notice ID clue, or failed-test phrase. BackflowPath will route you to the most specific source-backed page it has.

Notice guide
City and utility matching Portal family routing Failed-test and tester intent Official-source pages first
Best matches

Routes for "approved backflow tester"

Open the most specific city or utility route first. Portal hubs help when the notice names a software system but the local utility still controls the rule.

City route

Anaheim backflow notice route

Anaheim maps to City of Anaheim Cross Connection Control. Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.

  • Tester gate: official list
  • Due basis: Anaheim says backflow prevention devices must be tested annually, and repaired and retested if defective. The annual tests must be performed by an Orange County Health Care Agency certified tester carrying a valid City of Anaheim business license.
  • Fee clue: The real Anaheim friction is the approved-tester requirement plus the city's submission rules.
  • Failed-test clue: Anaheim only accepts approved testers from the city's list.
City route

Dublin backflow notice route

Dublin maps to Dublin San Ramon Services District Backflow Testing. Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.

  • Portal: Tokay WebTest
  • Tester gate: official list
  • Due basis: DSRSD says the Tokay test entry website must be used for existing backflow devices and that district-approved testers are required to enter tests electronically.
  • Fee clue: DSRSD's public friction is the split between new-device forms and existing-device Tokay entry.
City route

Marana backflow notice route

Marana maps to Marana Water Backflow Program. Report acceptance depends on the governing tester route and the utility's submission method; confirm status before scheduling.

  • Tester gate: official list
  • Due basis: Marana says required backflow assemblies must be tested annually by a certified tester registered with Marana Water. Failure to complete the test can lead to disconnection of potable water until a passing test is completed, and failed tests must be repaired or replaced within 7 days.
  • Fee clue: The strongest local cost driver is avoiding potable-water disconnect and repeat permit/inspection work.
  • Failed-test clue: Marana publishes one of the strongest Arizona failed-test timelines.
City route

Patterson backflow notice route

Patterson maps to City of Patterson Backflow Prevention Device Annual Test Program. Report acceptance depends on the governing tester route and the utility's submission method; confirm status before scheduling.

  • Tester gate: official list
  • Due basis: Patterson mails periodic test and maintenance letters in January and expects property owners to notify the city of their selected approved outside tester. If the owner does not respond, the city may perform the testing itself.
  • Fee clue: The commercial value is in the official-list funnel and annual-notice urgency, not a public fee schedule.
  • Failed-test clue: Patterson uses an annual letter cycle rather than generic evergreen copy.
City route

Phoenix backflow notice route

Phoenix maps to City of Phoenix Backflow Prevention Program. Report acceptance depends on the governing tester route and the utility's submission method; confirm status before scheduling.

  • Tester gate: official list
  • Due basis: Phoenix requires certified testers on the city list to perform testing and repairs, and the approved report has to be forwarded to Planning and Development by the due date shown on the work order.
  • Fee clue: The city does not publish retail testing prices, so the operational value is in the official tester list and reporting path rather than a fixed fee.
  • Failed-test clue: Phoenix ties testing to a city work-order due date.
City route

Pleasanton backflow notice route

Pleasanton maps to City of Pleasanton Cross-Connection Control Plan. Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.

  • Portal: Aqua/TrackMyBackflow
  • Tester gate: official list
  • Due basis: Pleasanton's official cross-connection control plan says testers submit qualifications and completed test reports through an online portal held by the City's third-party backflow service provider, currently Aqua Backflow.
  • Fee clue: Pleasanton's strongest cost signal is the administrative risk around accepted online reporting and tester credential upkeep.
City route

Prescott backflow notice route

Prescott maps to City of Prescott Backflow Prevention Program. Report acceptance depends on the governing tester route and the utility's submission method; confirm status before scheduling.

  • Tester gate: official list
  • Due basis: Prescott says all required backflow devices must be tested at installation and every year after that. The city requires customers to use one of Prescott's approved assembly testers and routes reports back to the Water Protection Office.
  • Fee clue: The real Prescott friction is staying inside the approved-tester and water-protection workflow.
  • Failed-test clue: Prescott says required devices are tested at installation and annually thereafter.
City route

Queen Creek backflow notice route

Queen Creek maps to Town of Queen Creek Backflow Program. Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.

  • Portal: BSI
  • Tester gate: official list
  • Due basis: Queen Creek requires annual backflow assembly reports through BSI Online, requires current tester licenses and up-to-date gauge calibration certificates, and charges a $14.95 filing fee per test report once the device is in the established reporting cycle.
  • Fee clue: The strongest local cost signal is avoiding rejected BSI submissions and repeated test fees.
City route

Riverside backflow notice route

Riverside maps to Riverside Public Utilities Backflow Prevention. Report acceptance depends on the governing tester route and the utility's submission method; confirm status before scheduling.

  • Tester gate: official list
  • Due basis: Riverside Public Utilities says each installed backflow device must be tested for proper operation at least annually, and it makes the customer responsible for following up with the contracted tester and assuring reports are submitted by the due date.
  • Fee clue: The strongest local value is the approved-tester filter and clear accepted-report workflow, not a posted city fee.
  • Failed-test clue: Riverside keeps the customer responsible for making sure the report is submitted on time.
City route

Sacramento backflow notice route

Sacramento maps to City of Sacramento Department of Utilities Cross-Connection Control. Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.

  • Tester gate: official list
  • Due basis: Sacramento's city and county cross-connection workflow uses approved tester lists and a county portal for registered testers and electronic test entry. The city's water certification language applies up to the property line, backflow preventer, or water meter.
  • Fee clue: The main local value is clarity around the city-county compliance chain, not a posted retail fee.
  • Failed-test clue: Sacramento publishes a real approved tester list.
City route

San Diego backflow notice route

San Diego maps to City of San Diego Public Utilities Backflow Program. Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.

  • Tester gate: official list
  • Due basis: San Diego says all backflow devices are tested annually and points customers to the approved tester list when the Public Utilities Department contacts them for compliance.
  • Fee clue: The commercial value is in the approved-list funnel and the enforcement pressure, not in a published retail rate.
  • Failed-test clue: San Diego explicitly mentions fines and water termination for noncompliance.
City route

San Ramon backflow notice route

San Ramon maps to Dublin San Ramon Services District Backflow Testing. Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.

  • Portal: Tokay WebTest
  • Tester gate: official list
  • Due basis: DSRSD says the Tokay test entry website must be used for existing backflow devices and that district-approved testers are required to enter tests electronically.
  • Fee clue: DSRSD's public friction is the split between new-device forms and existing-device Tokay entry.
Portal shortcuts

Jump to a named portal family

BSI

Find utility pages where BSI Online or Backflow Solutions appears in the official backflow test report, tester enrollment, or submission workflow.

WEIRS

Find utility pages where WEIRS appears in the official backflow tester lookup, water inspection, or report submission workflow.

SwiftComply

Find utility pages where SwiftComply or C3Swift appears in the official backflow report submission workflow.

VEPO/Envirotrax

Find utility pages where VEPO or Envirotrax appears in the official backflow tester registration, credential verification, or report submission workflow.

Aqua/TrackMyBackflow

Find utility pages where Aqua Backflow or TrackMyBackflow appears in the official backflow test reporting, filing-fee, or tester registration workflow.

Tokay WebTest

Find utility pages where Tokay or Tokay WebTest appears in the official backflow tester approval, credential, or online test report entry workflow.

Notice clue routes

Use the exact clue instead of a broad search

These shortcuts mirror the repeated winning pattern: city plus portal, city plus tester gate, city plus failed-test or annual notice.

Tester

Approved tester wording

Use this when the notice says approved, certified, registered, credential, license, insurance, or gauge calibration.

Urgency

Due date or failed-test wording

Use this when the notice mentions annual, due, deadline, anniversary, failed, repair, or retest.

Popular notice routes

Open source-backed routes without searching

These are the priority notice and portal paths to crawl first because they combine city, portal, tester, and report-submission intent.

Featured utility records

Open a utility workflow when the notice names the authority

Notice FAQ

What to read from a backflow notice

What should I paste into the BackflowPath notice finder?

Paste the city, utility, portal name, notice identifier, account clue, device clue, approved-tester wording, due-date wording, or failed-test phrase from the notice.

Which portal names can the notice finder route?

The finder recognizes BSI, Backflow Solutions, SwiftComply, C3Swift, WEIRS, VEPO, Envirotrax, Aqua Backflow, TrackMyBackflow, Tokay, and Tokay WebTest when those terms match source-backed pages.

What notice identifiers matter before scheduling a tester?

Keep the due date, service address, account number, CCN, Hazard ID, Site ID, device ID, assembly serial, or portal record visible so the tester can match the utility workflow.

What should I do if the notice says failed backflow test?

Open the failed-test route first. A failed assembly usually needs repair, retest, and accepted report submission, not only a generic annual testing appointment.