Notice finder

Turn a backflow notice into the right next page.

Search the city, utility, portal name, notice ID clue, or failed-test phrase. BackflowPath will route you to the most specific source-backed page it has.

Notice guide
City and utility matching Portal family routing Failed-test and tester intent Official-source pages first
Best matches

Routes for "sugar-land"

Open the most specific city or utility route first. Portal hubs help when the notice names a software system but the local utility still controls the rule.

City route

Sugar Land backflow notice route

Sugar Land maps to City of Sugar Land Water Utilities. Report acceptance depends on using the named portal or online submission path; keep proof that the report was submitted.

  • Portal: BSI
  • Due basis: Testing is due on the same date every month and not one year from the last test date. Test reports for existing and replacement devices must be submitted through the BSI tracking system.
  • Fee clue: The City page is stronger on workflow and enforcement than public pricing, so use local quotes rather than assuming a statewide rate.
  • Failed-test clue: The owner remains responsible for compliance even if testing work is delegated.
Utility workflow

City of Sugar Land Water Utilities workflow

Sugar Land runs an annual testing program for health-hazard backflow devices and tracks compliance through BSI.

  • Portal: BSI
  • Due basis: Testing is due on the same date every month and not one year from the last test date. Test reports for existing and replacement devices must be submitted through the BSI tracking system.
  • Fee clue: The City page is stronger on workflow and enforcement than public pricing, so use local quotes rather than assuming a statewide rate.
  • Failed-test clue: The owner remains responsible for compliance even if testing work is delegated.
City route

Garland backflow notice route

Garland maps to City of Garland Water Supply Protection. Report acceptance depends on the governing tester route and the utility's submission method; confirm status before scheduling.

  • Tester gate: official list
  • Due basis: Garland says all backflow prevention assemblies shall be tested according to TCEQ regulations prior to permanent activation of the plumbing system and annually thereafter. Test reports must be submitted to Garland Water Utilities within 10 days of the test.
  • Fee clue: Garland publishes a $88 irrigation permit fee, a $75 annual tester-registration fee, and a $25 test-form booklet fee on the official workflow. The tester-side fees matter even if the property owner only sees the final quote.
  • Failed-test clue: Garland uses a short 10-day report window after testing.
City route

Mesa backflow notice route

Mesa maps to Mesa Water Resources Backflow Prevention. Report acceptance depends on the named portal and the utility-approved tester route; keep proof that the report was submitted.

  • Tester gate: official list
  • Due basis: Mesa sends annual notices to regulated customers, requires recognized testers to submit results through the backflow portal within seven days of service, and requires immediate retesting after repair or maintenance.
  • Fee clue: The city does not publish a retail tester fee, so the main value is in the strict operational rules and list of recognized testers.
  • Failed-test clue: Mesa uses a seven-day result-submission window.
City route

Orlando backflow notice route

Orlando maps to Orlando Utilities Commission Backflow Program. Use the listed submission method and keep proof that the report was filed with the utility.

  • Due basis: OUC says all residential and commercial backflow prevention devices must be tested annually. Residential testing and maintenance are handled by OUC, while commercial customers may use OUC or their own licensed plumber and still must stay compliant.
  • Fee clue: The utility is unusually explicit about recurring testing costs, which makes this page commercially valuable.
  • Failed-test clue: OUC publicly states annual testing for both residential and commercial devices.
Utility workflow

City of Garland Water Supply Protection workflow

Garland is a strong pilot utility because it publishes the annual cadence, 10-day report rule, tester-registration workflow, irrigation permit details, and fire line registration requirements on official pages.

  • Tester gate: official list
  • Due basis: Garland says all backflow prevention assemblies shall be tested according to TCEQ regulations prior to permanent activation of the plumbing system and annually thereafter. Test reports must be submitted to Garland Water Utilities within 10 days of the test.
  • Fee clue: Garland publishes a $88 irrigation permit fee, a $75 annual tester-registration fee, and a $25 test-form booklet fee on the official workflow. The tester-side fees matter even if the property owner only sees the final quote.
  • Failed-test clue: Garland uses a short 10-day report window after testing.
Utility workflow

East Bay Municipal Utility District Backflow Prevention workflow

EBMUD supports trustworthy utility pages because it publishes an approved tester list, official policy links, and fire-flush rules that make the program operationally concrete.

  • Tester gate: official list
  • Due basis: EBMUD requires tests to be performed by testers on the district's approved list and keeps separate scheduling rules for fire flushes and related field operations.
  • Fee clue: The district's commercial value is in approval gating and project sequencing, not in a public retail fee sheet.
  • Failed-test clue: EBMUD keeps its own approved tester exam and public list.
Utility workflow

Mesa Water Resources Backflow Prevention workflow

Mesa is a high-value Arizona utility because it publishes the annual cadence, the seven-day submission rule, tester lists, and a city-code layer that covers residential, irrigation, and fire-related hazards.

  • Tester gate: official list
  • Due basis: Mesa sends annual notices to regulated customers, requires recognized testers to submit results through the backflow portal within seven days of service, and requires immediate retesting after repair or maintenance.
  • Fee clue: The city does not publish a retail tester fee, so the main value is in the strict operational rules and list of recognized testers.
  • Failed-test clue: Mesa uses a seven-day result-submission window.
Utility workflow

Orlando Utilities Commission Backflow Program workflow

OUC is one of the strongest Florida utility pages because it combines annual testing, residential-versus-commercial responsibility splits, pricing, and service-termination risk.

  • Due basis: OUC says all residential and commercial backflow prevention devices must be tested annually. Residential testing and maintenance are handled by OUC, while commercial customers may use OUC or their own licensed plumber and still must stay compliant.
  • Fee clue: The utility is unusually explicit about recurring testing costs, which makes this page commercially valuable.
  • Failed-test clue: OUC publicly states annual testing for both residential and commercial devices.
Utility workflow

Sacramento Suburban Water District Cross-Connection Control Program workflow

SSWD is a strong district page because approved testers and annual test entry live inside a real utility workflow.

  • Tester gate: official list
  • Due basis: SSWD says commercial, irrigation, institutional, industrial, and multifamily service connections require approved assemblies and approved tester portal entry.
  • Fee clue: The biggest local value is the district's operational workflow and covered-class clarity.
  • Failed-test clue: SSWD is explicit about which service classes must install assemblies.
Portal shortcuts

Jump to a named portal family

BSI

Find utility pages where BSI Online or Backflow Solutions appears in the official backflow test report, tester enrollment, or submission workflow.

WEIRS

Find utility pages where WEIRS appears in the official backflow tester lookup, water inspection, or report submission workflow.

SwiftComply

Find utility pages where SwiftComply or C3Swift appears in the official backflow report submission workflow.

VEPO/Envirotrax

Find utility pages where VEPO or Envirotrax appears in the official backflow tester registration, credential verification, or report submission workflow.

Aqua/TrackMyBackflow

Find utility pages where Aqua Backflow or TrackMyBackflow appears in the official backflow test reporting, filing-fee, or tester registration workflow.

Tokay WebTest

Find utility pages where Tokay or Tokay WebTest appears in the official backflow tester approval, credential, or online test report entry workflow.

Notice clue routes

Use the exact clue instead of a broad search

These shortcuts mirror the repeated winning pattern: city plus portal, city plus tester gate, city plus failed-test or annual notice.

Tester

Approved tester wording

Use this when the notice says approved, certified, registered, credential, license, insurance, or gauge calibration.

Urgency

Due date or failed-test wording

Use this when the notice mentions annual, due, deadline, anniversary, failed, repair, or retest.

Popular notice routes

Open source-backed routes without searching

These are the priority notice and portal paths to crawl first because they combine city, portal, tester, and report-submission intent.

Featured utility records

Open a utility workflow when the notice names the authority

Notice FAQ

What to read from a backflow notice

What should I paste into the BackflowPath notice finder?

Paste the city, utility, portal name, notice identifier, account clue, device clue, approved-tester wording, due-date wording, or failed-test phrase from the notice.

Which portal names can the notice finder route?

The finder recognizes BSI, Backflow Solutions, SwiftComply, C3Swift, WEIRS, VEPO, Envirotrax, Aqua Backflow, TrackMyBackflow, Tokay, and Tokay WebTest when those terms match source-backed pages.

What notice identifiers matter before scheduling a tester?

Keep the due date, service address, account number, CCN, Hazard ID, Site ID, device ID, assembly serial, or portal record visible so the tester can match the utility workflow.

What should I do if the notice says failed backflow test?

Open the failed-test route first. A failed assembly usually needs repair, retest, and accepted report submission, not only a generic annual testing appointment.